Artificial Xmas Tree Warehouse

LARGE CHRISTMAS TREES

Click each picture to see a larger size picture, then use your

Web browser's Back button to return to this page.

TRADE ENQUIRIES

Please contact us with any questions either by Telephone, Fax or Email, 

All this information can be found in our 

CONTACT US page.

TO ORDER ANY OF THESE ITEMS, CLICK THE QUANTITY INTO THE Add LIST OR

Email to: hyhil@bigpond.com.au

THE PARAMOUNT SPRUCE 6m -12m (SPECIAL CONSTRUCTION) [INDOOR OUTDOOR] PRE LIT OR UNLIT

We introduce the most advanced design and construction of a Christmas tree that offers safety with

size (and natural appearance) to cater to every requirement

The Paramount Spruce can be built from 6m (20ft) to 12m (40ft)

As we manufacture only to order, we can offer both INDOOR or OUTDOOR design.

The tree can be pre-lit with LED lights supplied by us and professionally attached to the tree at the factory, or unlit.

The outdoor frame can be made with 2 different safety frames:-

(A) With surface bolt provisions and guy wire extensions to secure the tree to the surface.

(B) With additional base frame "OCB" (Outdoor Cross Base) which will need to have sandbags or cement blocks added on top of the "OCB" to

the required weight to satisfy the wind-loading requirements in your area.

The entire tree can be dismantled and packed into a number of wooden crates and cartons for storage.

ADVANTAGES OF OUR PARAMOUNT SPRUCE DESIGN: -

*The panels (see above picture) have hinged branches, which allows you to decorate on the ground and then lift the panel up to

install onto the frame.

*Total assembly of the tree can be accomplished within a few hours (depending on the size of the tree and the available labour),

*As the frame is strong enough to support a normal persons weight, the frame can be climbed on during assembly and built

 entirely by hand with the use of a safety harness if scaffold, hoist or cherry - picker is not available.

*If the tree is prelit the need and cost for a large number of decorations for the tree, is reduced.

*The light strings for the pre-lit versions are designed especially for this tree, and are professionally tied into the branches

 to achieve an impressive, even and sparkling lighting effect.

*A pre-lit tree offers great labour-saving, as the lights remain on the branches after the season and are packed away

ready for the next season.

*We use the latest, low voltage LED caped waterproof non replaceable lights "eco-friendly" with one transformer for every 4 panels, thus the number power outlets and power required is reduced.

Each panel has 104 x lights (tree top requires 2 x sets of 104 lights)

*PLEASE NOTE ADDITIONAL WEIGHT BEARING DEVICES MAY BE REQUIRED TO SATISFY LOCAL REQUIREMENTS.

PLEASE CONSULT YOUR LOCAL AUTHORITY.

*We can recommend the services of Taylor Thompson Whitting (one of Australia's leading Structural Engineering consulting firms) should you require any professional

 engineering advice regarding installation of this tree.

FOR ANY ADDITIONAL INFORMATION PLEASE EMAIL TO:- hyhil@bigpond.com.au

OR PHONE HYLTON:- +61 2 9684 6600

THE MODULAR QUICK ASSEMBLY CONE TREE [INDOOR/OUTDOOR]

The Cone tree is designed in 2ft (61cm) sections

Each section has screw on connections (colour coded) to join to the

next section above.

When disassembled the sections will store within each other

thus reducing the storage area required.

Tree can be used for indoor or outdoor displays.

Lights and decorations can be secured to the frame.

The Minimum height 1.80m.

Maximum height of 3.66m

Tree reaches to the floor.

Colour: Dark Green

SCANDIA SPRUCE

One of our most popular export trees, we ship this Spruce all over the world.

Offering a wide range of sizes, this tree is suitable for the home, office,

store, club, hotel and shopping centres. 

Made with a very plush, soft needle and 2½" wide round tips, it's easy to

decorate and easy to light. 

Available in 7 sizes and a white tree 2.135m. This tree is designed basically as an indoor tree 

Branches reach close to the floor.

Colour: Dark Green 

The colour of a white Christmas tree is excluded in our warranty

PLEASE ASK US ABOUT OUR SPECIAL HEAVY DUTY STANDS

AND SPECIAL MOBILE STANDS FOR SOME MODELS SEE BELOW UNDER HALF TREES

RADIATA BALMORAL PINE (INDOOR)

Reminiscent of the Blue Mountains Radiata Pines, we use a special

material to create a hard needle, rustic and lifelike Pine.

This tree looks and feels so real, you will not be able to tell

the difference between the artificial and the natural tree. 

The tips are 3" wide and it is available in 4 sizes.  

Branches reach close to the floor. 

Colour: Dark green

PLEASE ASK US ABOUT OUR SPECIAL HEAVY DUTY STANDS

AND SPECIAL MOBILE STANDS FOR SOME MODELS SEE BELOW UNDER HALF TREES